Reverse Mount E-Brake

$229

15.25″ Reverse Mount E-Brake

The ASD reverse mount pull back e-brake has been designed to place the master cylinder further away from the driver. Although not necessary in all vehicles, this improves room for the driver in smaller vehicles – or for larger drivers who are a little more cramped in their cars.

Clear selection

Product Information

Many of you have asked and ASD listened…The all new ASD 15.25″ “Reverse Mount” E-brake is here!

This new updated product has been re-designed from a blank CAD screen, specifically as a reverse mount option.

The ASD reverse mount pull back e-brake has been designed to place the master cylinder further away from the driver. Although not necessary in all vehicles, this improves room for the driver in smaller vehicles – or for larger drivers who are a little more cramped in their cars.

For those who prefer to mount their ASD e-brake on the side of the tunnel rather than on top of the tunnel, this new product also allows a lot more seat room by placing the master cylinder in the forward location and away from the seat.

It is a few dollars more expensive than our original ASD e-brake product due to the increased manufacturing costs of the one piece CNC machined base, but for those who want a little more driver room in their cars it is the perfect solution.

If you are on a budget and saving a few bucks makes a difference, we understand! We still offer the original style ASD E-brake too, please click here for that option.

The “Reverse Mount” ASD E-brake features include:

  • 15.25” e-brake handle, CNC machined from 6061-T6 aluminum
  • 6061-T6 Aluminum base, CNC machined from one single block for maximum strength
  • Your choice of Black or gold anodizing on the CNC machined base
  • Your choice of Wilwood master cylinder sizes (5/8” or 3/4”)
  • Your choice of Wilwood “reservoir” or “pass-through” style master cylinder
  • Black powder coating on master cylinder. We disassemble, inspect, powdercoat, and reassemble every single Wilwood master cylinder for build quality assurance.
  • 6061 Aluminum, red anodized FK Bearing heim joint with PTFE liner for maximum life
  • Proper Aircraft grade hardware and Mil-Spec AN washers
  • Plumbing hardware options for -3AN lines
  • Plumbing hardware options for 3/16” steel brake line tube
  • Same bolt pattern on the base as our other ASD products (will bolt right onto your same tunnel mount)
  • Complete e-brake assembly only weighs 2 lbs 3 oz! (1 kilogram). CAD designed to be lightweight but very strong for years of abuse!
  • 100% designed and manufactured in the USA.

Frequently Asked Questions

FITMENT QUESTIONS:

  1. WHAT SIZE E-BRAKE MASTER CYLINDER SHOULD I ORDER (3/4″ or 5/8″ diameter)? (click here)
  2. WHAT’S THE DIFFERENCE BETWEEN THE ‘PASS THROUGH’ AND ‘RESERVOIR’ ASD E-BRAKE SYSTEMS? (click here)
  3. DO I NEED THE -3AN ADAPTER? (click here)
  4. DO I NEED THE HARD LINE FITTING ADAPTER? (click here)
  5. DOES THE ASD HYDRAULIC E-BRAKE WORK WITH DRUM BRAKES? (click here)
  6. IS THERE A BRAKE PAD YOU RECOMMEND USING IF YOU’RE RUNNING A WILWOOD DUAL CALIPER SET-UP? (click here)
  7. IS THERE A BRAKE PAD YOU RECOMMEND USING IF YOU’RE RUNNING AN OEM CALIPER SET-UP? (click here)
  8. SHOULD I USE ANY PARTICULAR TYPE OF BRAKE FLUID? (click here)
  9. CAN I PURCHASE JUST THE HANDLE? (click here)

 

SHIPPING QUESTIONS:

  1. CAN I HAVE MY ORDER SHIPPED VIA UNITED STATES POSTAL SERVICE? (click here)
  2. DOES MY ORDER INCLUDE INSURANCE AND TRACKING? (click here)
  3. WHY IS SHIPPING OVERSEAS SO EXPENSIVE? (click here)
  4. CAN I BECOME A DEALER/WHOLESALER?(click here)
  5. AFTER I PLACE MY ORDER, WHEN WILL MY ORDER SHIP?(click here)
  6. HOW LONG DOES GROUND SHIPPING TAKE? (click here)


WHAT SIZE E-BRAKE MASTER CYLINDER SHOULD I ORDER (3/4″ or 5/8″ diameter)?

Please refer to the sizing chart below:

ASD_MC_Chart2015

(scroll to top) 


WHAT’S THE DIFFERENCE BETWEEN THE ‘PASS THROUGH’ AND ‘RESERVOIR’ ASD E-BRAKE SYSTEMS?

ASD’s ‘Reservoir’ E-brake incorporates its own brake reservoir working independently from the vehicle’s brake system. ASD’s ‘Pass Through’ E-brake works in-line with the existing vehicle’s brake system.

 

WHAT E-BRAKE SYSTEM SHOULD I CHOOSE (PASS THROUGH OR RESERVOIR)?

Vehicle applications that have one brake caliper on each wheel will use the ‘Pass Through’ system. However, if you are running two brake calipers on each wheel you will need the ‘Reservoir’ ASD e-Brake.

Pull-Bk_RES-vs-PT

(scroll to top) 


DO I NEED THE -3AN ADAPTER?

ASD offers master cylinder adapters to fit -3AN* braided lines for its E-Brake products. Two adapters are used for the inlet and outlet ports on ‘Pass Through’ master cylinders and one adapter is used for ‘Reservoir’ master cylinders. These are master cylinder -3AN adapters only,  -3AN braided lines must be purchased separately.

* Note: -3AN is an U.S. military-grade fitting specification used to connect flexible and rigid tubing carrying fluids

(click here) for the link to the -3AN ADAPTER product page

 

-3AN-adapter-charts

(scroll to top) 


DO I NEED THE HARD LINE FITTING ADAPTER?

The Hard Line Fitting Adapter converts the 7/16-24 thread in the “Pass Through” master cylinder inlet port to a very common 3/8-24 thread as used with 3/16” hard line brake nuts.

Used only with “Pass Through” master cylinders. Highly recommended when plumbing with 3/16” steel hard lines (and when not using -3AN flexible lines).

– (click here) for the link to the HARD LINE FITTING ADAPTER product page

 

diagram-HARD_LINE

(scroll to top) 


DOES THE ASD HYDRAULIC E-BRAKE WORK WITH DRUM BRAKES?

We do not recommend use with drum brakes.

(scroll to top) 


IS THERE A BRAKE PAD YOU RECOMMEND USING IF YOU’RE RUNNING A WILWOOD DUAL CALIPER SET-UP? 

We recommend using a Wilwood “B” compound pad for the best locking capabilities with your e-brake.

(scroll to top) 


IS THERE A BRAKE PAD YOU RECOMMEND USING IF YOU’RE RUNNING AN OEM CALIPER SET-UP? 

Any non-race type compound will work well, which means any brake pad that is not recommended for high temperature use (normally rear brake rotors on drift cars do not see temperatures high enough for race compounds to be effective).

When available for your application, the Hawk DTC60 compound is a great choice (but not required).

(scroll to top) 


SHOULD I USE ANY PARTICULAR TYPE OF BRAKE FLUID?

You can keep using whichever brake fluid you currently use in your car. We recommend a minimum of DOT3 and prefer DOT4 for all performance cars.

(scroll to top) 


CAN I PURCHASE JUST THE HANDLE?

Our ASD-designed handle is only sold as part of the ASD Hydraulic e-brake. However, ASD E-brake handles damaged in racing accidents can be replaced for prior customers upon proof of original purchase and by shipping the customer’s original handle to ASD for disposal.

(scroll to top) 

 

SHIPPING QUESTIONS:


CAN I HAVE MY ORDER SHIPPED VIA UNITED STATES POSTAL SERVICE?

Unfortunately, ASD Motorsports does not use United States Postal Service for a shipping option for our E-Brakes.

(scroll to top) 


DOES MY ORDER INCLUDE INSURANCE AND TRACKING?

ASD domestically ships its product exclusively with UPS, the nation’s largest shipping and logistic company, because of its service, reach and low-rates. ASD receives a volume rate discount which we pass along to our customers automatically bundled with insurance and tracking services. Once your shipping label is created, you will automatically receive a tracking number via email from ASD.

 

ASD international shipments are exclusively handled by DHL, the world’s largest logistic company. Through past experience we have determined DHL has the largest global reach, lowest rates and the best service, which includes insurance, customs clearing and tracking services. Once your shipping label is created, you will automatically receive a tracking number via email from ASD.

(scroll to top) 


WHY IS SHIPPING OVERSEAS SO EXPENSIVE?

We only use DHL International Express because of their fast shipping, quality of service and they don’t lose packages!  In most cases when using this service, your order will arrive in 2-4 business days after leaving our facility.  These services are essentially “air freight” services, which is why they are more expensive.

Your DHL Express shipping cost also includes customs broker fees, customs import costs and fees, and all associated tariffs for import into your country. These costs are all calculated automatically and included in your shipping total. Other services appear cheaper initially, however almost always cost more upon final delivery once all additional importation and customs costs are included.

 

Other international shipping options can be discussed with an ASD representative when multiple products are purchased and can be shipped in one larger box (get your friends together!)

 

Sometimes your international order can ship from an international ASD warehouse. If this is available the appropriate shipping cost will be automatically calculated during check out.

(scroll to top) 


CAN I BECOME A DEALER/WHOLESALER?

Unfortunately, we do not offer dealer/wholesale programs.  Our goal is to keep the retail cost of our products as low as possible, and also to ensure customer support and customer questions are answered accurately, directly from ASD Motorsports

(scroll to top) 


AFTER I PLACE MY ORDER, WHEN WILL MY ORDER SHIP?

In most cases, if your order is placed before 1:00 PM Eastern Standard Time (EST) Monday-Friday, it will ship the same day or the following business day.  During our Formula Drift or International race weekends however, orders may be shipped the following Monday – Tuesday unless otherwise stated. You will receive an email confirmation from ASD Motorsports and your selected shipping service with your tracking information as soon as the shipping label is generated. Shipping labels are generated on the day of shipment.

(scroll to top) 


HOW LONG DOES GROUND SHIPPING TAKE?

See the map below for UPS ground shipping transit times from Charlotte, North Carolina.

UPS-Map

(scroll to top) 

 

Product Video


ASD Motorsports products are specifically designed, engineered and manufactured for competing at the highest levels of world drifting and motorsport competition.


If you are not fully satisfied for any reason, please return your purchase within 30 days of the original order date. ASD Motorsports products must be uninstalled and return shipped in original packaging for a full refund of your purchase price. Refunds will be issued once the ASD Motorsport product has been received and inspected, confirming compliance with the terms and conditions of a product return. Customers returning product are responsible for all associated shipping costs.


Any returns verified by ASD Motorsports as an unlikely manufacturing or assembly issue at no fault of the customer will result in a 100% refund or replacement, at the customer’s discretion, including all shipping costs.


Please contact sales@asdmotorsports.com prior to returning any product.


For more information please click here to see our terms and conditions.

 

Please share photos of your ASD e-brake with us and we'll post the best examples here on our 'wall of infamy'...

Send photos to sales@asdmotorsports.com please also include your name, car model and location.

 

William Hennessy - Carlow, Ireland

William-Hennessy

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Daniel Hollands - Adelaide, South Australia

Daniel-Hollands

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Josh Buittner - Langhorne, Pennsylvania USA

Josh-Buittner

As used by these professional drivers:

Vaughn Gittin Jr., Chris Forsberg, Ryan Tuerck, Daigo Saito, Robbie Nishida, "Mad Mike" Whiddett, Jhonnattan Castro, Steve "Baggsy" Biagioni, Pat Goodin, Forrest Wang, Odi Bakchis, Ken Gushi, Mats Baribeau, Matt Powers, Ahmed Alamri, Tony Angelo, Masashi Yokoi, Tsuyoshi Tezuka, Abdulhadi Al-Qahtani and many more…

 

ASD E-Brake testimonials from satisfied customers:

 

Wow ASD this thing is sick!! <3 it!

Thanks for the suggestion William Petrow!

Brakim Racing

 

Works perfect in movie stunts... Thanks!

I wanted to thank you so much for your assistance in getting our police cars sideways!

I have just finished installing 4 of your systems into our ex police crown vics and they all react exactly the same and we are enjoying the fun it brings!!!From your first email back to me explaining all the answers we needed before asking the questions it was a sure fit that we were going to be doing business with you.Thank you so much and I am sure we will be ordering more once we have more people that want to drift with us.Thanks again and I look forward to more business with you.

Tim Cody, Professional Stuntman - Canada

 

Worth it’s weight in Gold…..

I have this set up with a dual caliper bracket on my S13 using 2 sets of Z32 calipers and the 3/4″ ASD reservoir. It is effortless to lock up my rear. Was worried because I drift on 245 wide tires but it locked them up with a slight tug! People are in disbelief when they ride along. Some of them turned right around and bought their own! I send ASD all the business now! Thanks ASD!

Casey Hoffman from Hagerstown, MD.

 

16inch pull back hydraulic ebrake

Thanks ASD for the awesome customer service I ordered this Friday with next day air and The shipping info said it would be here Monday so Bonnie took my shipment down to the shipping store and got it arranged for it to come Saturday on time. I’m very please with how they took care of things and how well this new product works on my ae86 effortlessly lock up the rear now. Thank you again ASD for hooking it up!

Jeffrey Lansdell from Long Beach, CA.

 

Hydro brake was perfect!

The hydro brake was amazing!! It was the perfect length, and feel. I loved it so much I found myself pulling the handle when I really shouldn’t be just to see what would happen. Every time I would get two equal black strips of rubber and two identical puffs of smoke. That hydro brake is pure perfection.

Jonathan from Toronto, Canada.

 

Perfect

Bought this to replace my crappy ebay hydro and instantly fell in love with it works great in my Rx7!

Robert Ward from China Grove, NC.

 

Amazing!!

So awesome! Does everything I wished my old PBM and CNC e-brake’s would have done. Finally someone makes this with the right know how and parts. Thanks!

Scott Troutman from Miami, FL.